Walker Signature Tape, part of Walker Tape®'s Signature Line, is the thinnest (6.5mil) maximum wear tape on the market, built to last 4+ weeks with proper preparation. Made with a dull finish for a near-invisible look, low residue for easy cleanup, and skin safe gentleness for your skin, Walker Signature Tape provides a secure and reliable hold for all wearers.

• The Thinnest Maximum Wear Tape on the Market: Walker Signature Tape is built with a thickness of 6.5mil (nearly half of other max wear tapes) and holds for 4+ week, making it the thinnest maximum wear tape on the market.
• Skin-Safe and Low Residue: Walker Signature Tape is made with low residue and skin safe gentleness for an easy and comfortable wear.
• Strong and Reliable: Walker Signature Tape has a hold time of up to 4+ weeks, making for a reliabel and strong hold for all hair systems.

We recommend performing a patch test before use.

Directions

Prep for Install

1. Clean the hair system and bio hair with Bond Breaker Shampoo, let dry.
2. Apply 99% Alcohol to the scalp and the base of the system to prepare for optimal adhesion. Allow to completely evaporate.
3. Apply Max Hold Sport or Scalp Protector to the scalp to enhance the tape’s bond strength and shield against skin irritation.

Applying Rolls

1. Peel the tape from the roll and cut to the desired length.
2. Place the adhesive side toward the unit. Avoid touching the adhesive.
3. Place the tape piece where desired on the hair system. Repeat as needed.
4. When ready to apply to the scalp, peel off the remaining white liner pieces. For easier application, spray Just-Rite Positioning Spray over the adhesive area to allow for more time to place and more precise placements.
5. Press the hair system firmly onto the scalp, hold for at least 10 seconds.

Applying the Strips

1. Peel off the liner that is scored down the middle.
2. Place the adhesive side toward the unit. Avoid touching the adhesive.
3. Place the tape contour where desired on the hair system. Repeat as needed.
4. When ready to apply to the scalp, peel off the remaining printed liner pieces. For easier application, spray Just-Rite Positioning Spray over the adhesive area to allow for more time to place and more precise placements.
5. Press the hair system firmly onto the scalp, taking care not to move it in the process.

Keep the product away from heat, humidity, and light. Store in a well-ventilated, cool, dark, dry, room-temperature controlled environment (60-80°F). Seal bags completely. With proper storage, our tapes have a shelf life of up to one year.

Q. What types of hair systems can I use with Walker Signature Tape?

A. Walker Signature Tape works on all hair system types.

Q. If it's thinner, does that mean it isn't as strong?

A. Not at all for Walker Signature Tape! Signature Tape is built with maximum wear strength and hold times.

Q. Is Walker Signature Tape shiny?

A. It is not! Walker Signature Tape is made with a dull finish, making it nearly invisible under hair systems.

Signature Tape: So Thin, So Strong, So Walker

Walker Signature Line

Products Every Salon needs Going Forward